Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 73

Parameters • ipv4-address/mask - Enter an IPv4 network address in dotted-decimal format (A.B.C.D), then a subnet mask in prefix-length format (/xx). • ipv6-address/prefix-length - Enter an IPv6 address in x:x:x:x::x format with the prefix length in /xxx format. The prefix range is /0 to /128. • forwarding-router-address - Enter the next-hop IPv4/IPv6 address of a forwarding router (gateway) for network traffic from the Management port. • managementethernet - Configure the Management port as the interface for the route; forces the route to be associated with the Management interface. Default Command Mode Usage Information Example (IPv4) Not configured CONFIGURATION Management routes are separate from IP routes and are only used to manage the system through the Management port. To display the currently configured IPv4 and IPv6 management routes, enter the show ip management-route and show ipv6 management-route commands. OS10(config)# management route 10.10.20.0/24 10.1.1.1 OS10(config)# management route 172.16.0.0/16 managementethernet Example (IPv6) OS10(config)# management route 10::/64 10::1 Supported Releases 10.2.2E or later move Moves or renames a file on the configuration or home system directories. Syntax Parameters move [config: | home: | usb:] • config: - Move from the configuration directory (config://filepath). • home: - Move from the home directory (home://filepath). • usb: - Move from the USB file system (usb://filepath). Default Command Mode Usage Information Example Not configured EXEC Use the dir config command to view the directory contents. OS10# move config://startup.xml config://startup-backup.xml Example (dir) OS10# dir config Directory contents for folder: config Date (modified) Size (bytes) Name 2017-04-26T15:23:46Z 26704 startup.xml Supported Releases 10.2.0E or later Getting Started 73