Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 957

Command Mode Usage Information Example ROUTE-MAP This command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preference command. The no version of this command removes the LOCAL_PREF attribute. OS10(conf-route-map)# set local-preference 200 Supported Releases 10.2.0E or later set metric Set a metric value for a routing protocol. Syntax set metric [+ | -] metric-value Parameters • + - (Optional) Add a metric value to the redistributed routes. • - - (Optional) Subtract a metric value from the redistributed routes. • metric-value - Enter a new metric value, from 0 to 4294967295. Default Command Mode Usage Information Example (Absolute) Not configured ROUTE-MAP To establish an absolute metric, do not enter a plus or minus sign before the metric value. To establish a relative metric, enter a plus or minus sign immediately preceding the metric value. The value is added to or subtracted from the metric of any routes matching the route map. You cannot use both an absolute metric and a relative metric within the same route map sequence. Setting either metric overrides any previously configured value. The no version of this command removes the filter. OS10(conf-route-map)# set metric 10 Example (Relative) OS10(conf-route-map)# set metric -25 Supported Releases 10.2.0E or later set metric-type Set the metric type for the a redistributed routel. Syntax set metric-type {type-1 | type-2 | external} Parameters • type-1 - Adds a route to an existing community. • type-2 - Sends a route in the local AS. • external - Disables advertisement to peers. Default Command Mode Usage Information Not configured ROUTE-MAP • BGP Access Control Lists 957