Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 305

lldp receive Enables or disables the LLDP packet reception on a specific interface. Syntax Parameters Default Command Mode Usage Information Example lldp receive None Not configured INTERFACE Enable LLDP globally on the system before using the lldp receive command. The no version of this command disables the reception of LLDP packets. OS10(conf-if-eth1/1/3)# lldp receive Supported Releases 10.2.0E or later lldp reinit Configures the delay time in seconds for LLDP to initialize on any interface. Syntax lldp reinit seconds Parameters seconds - Enter the delay timer value in seconds, from 1 to 10. Default 2 seconds Command Mode CONFIGURATION Usage Information The no version of this command resets the value to the default. Example OS10(config)# lldp reinit 5 Supported Releases 10.2.0E or later lldp timer Configures the rate in seconds at which LLDP packets send to the peers. Syntax Parameters Default Command Mode Usage Information Example lldp timer seconds seconds - Enter the LLDP timer rate in seconds, from 5 to 254. 30 seconds CONFIGURATION The no version of this command sets the LLDP timer back to its default value. OS10(config)# lldp timer 25 Supported Releases 10.2.0E or later Layer 2 305