Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 996

Example OS10(conf-pmap-que)# bandwidth percent 70 Supported Releases 10.2.0E or later buffer-statistics-tracking Enables or disables buffer statistics tracking feature globally. Syntax Parameters Default Command Mode Usage Information Example buffer-statistics-tracking None Disabled SYSTEM-QOS The no form of the command disables buffer statistics tracking feature globally. After you disable BST, be sure to clear the counter using the clear qos statistics type buffer-statistics-tracking command. OS10# configure terminal OS10(config)# system qos OS10(config-sys-qos)# buffer-statistics-tracking Supported Releases 10.4.3.0 or later class Creates a QoS class for a type of policy-map. Syntax class class-name Parameters class-name - Enter a name for the class-map. A maximum of 32 characters. Default Not configured Command Mode POLICY-MAP-QUEUEING POLICY-MAP-QOS POLICY-MAP-NQOS POLICY-MAP-CP POLICY-MAP-APPLICATION Usage Information Example If you define a class-map under a policy-map, the qos, queuing, or control-plane type is the same as the policy-map. You must create this map in advance. The only exception to this rule is when the policy-map type is trust, where the class type must be qos. OS10(conf-pmap-qos)# class c1 Supported Releases 10.2.0E or later 996 Quality of service