Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 958

Affects BGP behavior only in outbound route maps and has no effect on other types of route maps. If the route map contains both a set metric-type and a set metric clause, the set metric clause takes precedence. If you enter the internal metric type in a BGP outbound route map, BGP sets the MED of the advertised routes to the IGP cost of the next hop of the advertised route. If the cost of the next hop changes, BGP is not forced to readvertise the route. - external - Reverts to the normal BGP rules for propagating the MED, the default. - internal - Sets the MED of a received route that is being propagated to an external peer equal to the IGP costs of the indirect next hop. • OSPF - external - Sets the cost of the external routes so that it is equal to the sum of all internal costs and the external cost. - internal - Sets the cost of the external routes so that it is equal to the external cost alone, the default. The no version of this command removes the set clause from a route map. Example OS10(conf-route-map)# set metric-type internal Supported Releases 10.2.0E or later set next-hop Sets an IPv4 or IPv6 address as the next-hop. Syntax set {ip | ipv6} next-hop ip-address Parameters ip-address - Enter the IPv4 or IPv6 address for the next-hop. Default Not configured Command Mode ROUTE-MAP Usage Information If you apply a route-map with the set next-hop command in ROUTER-BGP mode, it takes precedence over the next-hop-self command used in ROUTER-NEIGHBOR mode. In a route-map configuration, to configure more than one next-hop entry, use multiple set {ip | ipv6} next-hop commands. When you apply a route-map for redistribution or route updates in ROUTER-BGP mode, configure only one next-hop. Configure multiple next-hop entries only in a route-map used for other features. The no version of this command deletes the setting. Example OS10(conf-route-map)# set ip next-hop 10.10.10.2 Example (IPv6) OS10(conf-route-map)# set ipv6 next-hop 11AA:22CC::9 Supported Releases 10.2.0E or later set origin Set the origin of the advertised route. Syntax Parameters set origin {egp | igp | incomplete} • egp - Enter to add to existing community. • igp - Enter to send inside the local-AS. 958 Access Control Lists