Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 60

---mTest ---Config Number of config aliases : 1 Number of local aliases : 0 ----line 1 "interface ..." line 2 "no shutdow..." line 3 "show confi..." default 1 "ethernet" default 2 "1/1/1" View alias detail. Displays the entire alias value. OS10# show alias detail Name Type ---- ---- mTest Config Value ----line 1 "interface $1 $2" line 2 "no shutdown" line 3 "show configuration" default 1 "ethernet" default 2 "1/1/1" Number of config aliases : 1 Number of local aliases : 0 Delete alias OS10(config)# no alias mTest Batch mode Create and run a batch file to execute a sequence of multiple commands. A batch file is an unformatted text file that contains two or more commands. Store the batch file in the home directory. Use vi or any other editor to create the batch file, then use the batch command to execute the file. To execute a series of commands in batch mode (non-interactive processing), use the batch command. OS10 automatically commits all commands in a batch file - you do not have to enter the commit command. If a command in the batch file fails, batch operation stops at that command. The remaining commands are not executed. • Create a batch file (for example, b.cmd) on a remote device by entering a series of commands. interface ethernet 1/1/1 no shutdown no switchport ip address 172.17.4.1/24 • Copy the command file to the home directory on the switch. OS10# copy scp://os10user:[email protected]/home/os10/b.cmd home://b.cmd OS10# dir home Directory contents for folder: home Date (modified) Size (bytes) 2017-02-15T19:25:35Z 77 b.cmd ... Name ------ • Execute the batch file using the batch /home/username/filename command in EXEC mode. OS10# batch /home/admin/b.cmd Jun 26 18:29:12 OS10 dn_l3_core_services[723]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_ADD: IP Address add is successful. IP 172.17.4.1/24 in VRF:default added successfully • (Optional) Verify the new commands in the running configuration. OS10# show running-configuration interface ethernet 1/1/1 ! 60 Getting Started