Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 475

listen Enables peer listening and sets the prefix range for dynamic peers. Syntax Parameters listen ip-address [limit count] • ip-address-Enter the BGP neighbor IP address. • limit count-(Optional) Enter a maximum dynamic peer count, from 1 to 4294967295. Default Command Mode Usage Information Example Not configured ROUTER-TEMPLATE Enables a passive peering session for listening. The no version of this command disables a passive peering session. OS10(conf-router-template)# listen 1.1.0.0/16 limit 4 Supported Releases 10.2.0E or later local-as Configures a local AS number for a peer. Syntax Parameters local-as as-number [no-prepend] • as-number-Enter the local AS number, from 1 to 4294967295. • no-prepend-(Optional) Enter so that local AS values are not prepended to announcements from the neighbor. Default Disabled Command Mode ROUTER-NEIGHBOR or ROUTER-TEMPLATE Usage Information Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of this command resets the value to the default. Example (Neighbor) OS10(conf-router-bgp-10)# neighbor lunar OS10(conf-router-neighbor)# local-as 20 Example (Template) OS10(conf-router-bgp-10)# template solar OS10(conf-router-template)# local-as 20 Supported Releases 10.3.0E or later log-neighbor-changes Enables logging for changes in neighbor status. Syntax log-neighbor-changes Parameters None Default Enabled Command Mode ROUTER-BGP Layer 3 475