Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1193

Command Mode Usage Information Example EXEC None OS10# clear logging log-file Proceed to clear the log file [confirm yes/no(default)]: Supported Releases 10.2.0E or later logging console Disables, enables, or configures the minimum severity level for logging to the console. Syntax Parameters logging console {disable | enable | severity} severity - Set the minimum logging severity level: • log-emerg - Set to unusable. • log-alert - Set to immediate action is needed. • log-crit - Set to critical conditions. • log-err - Set to error conditions. • log-warning - Set to warning conditions. • log-notice - Set to normal but significant conditions, the default. • log-info - Set to informational messages. • log-debug - Set to debug messages. Default Command Mode Usage Information Log-notice CONFIGURATION To set the severity to the default level, use the no logging console severity command. The default severity level is log-notice. Example OS10(config)# logging console disable Example (Enable) OS10(config)# logging console enable Example (Severity) OS10(config)# logging console severity log-warning Supported Releases 10.2.0E or later logging enable Enables system logging. Syntax logging enable Parameters None Default Enabled Command Mode CONFIGURATION Usage Information The no version of this command disables all logging. Troubleshoot OS10 1193