Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 110

OID excluded Supported Releases 10.4.2.0 or later : 1.3.6.5 : True snmp-server community Configures an SNMP user community. Syntax Parameters snmp-server community name {ro | rw} [acl acl-name] • community name - Set the community name string to act as a password for SNMPv1 and SNMPv2c access. A maximum of 20 alphanumeric characters. • ro - Set read-only access for the SNMP community. • rw - Set read-write access for the SNMP community. • acl acl-name - Enter an existing IPv4 ACL name to limit SNMP access in the SNMP community. Defaults Command Mode Usage Information An SNMP community has read-only access. CONFIGURATION The SNMPv1 and SNMPv2c security models use a community-based form of security. Use the snmp-server community command to configure read-only or read-write access for an SNMP community name. The configured community text string is used for SNMPv1 and SNMPv2c user authentication. To display the SNMP communities on the switch, use the show snmp-server community command. The no version of the command removes the configured community text string. Example OS10(config)# snmp-server community admin rw OS10(config)# snmp-server community public ro acl snmp-read-only-acl Supported Releases 10.2.0E or later snmp-server contact Configures contact information for troubleshooting the local SNMP switch. Syntax snmp-server contact text Parameters text - Enter an alphanumeric text string. A maximum of 55 characters. Default The SNMP server contact is support. Command Mode CONFIGURATION Usage Information The no version of this command resets the SNMP server contact to the default value. Example OS10(config)# snmp-server contact administrator Supported Releases 10.2.0E or later 110 System management