Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1011

Parameters Default Command Mode Usage Information Example wred-profile - Enter the name of an existing WRED profile. Not configured INTERFACE The no version of this command removes the WRED profile from the interface. OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# random-detect test_wred Supported Releases 10.4.0E(R1) or later random-detect (queue) Assigns a WRED profile to the specified queue. Syntax Parameters Default Command Mode Usage Information Example random-detect wred-profile-name wred-profile-name - Enter the name of an existing WRED profile. Not configured PMAP-C-QUE The no version of this command removes the WRED profile from the queue. OS10(config)# policy-map type queuing p1 OS10(config-pmap-queuing)# class c1 OS10(config-pmap-c-que)# random-detect test_wred Supported Releases 10.4.0E(R1) or later random-detect color Configures the threshold of WRED profile for available colors. Syntax random-detect color color-name minimum-threshold minimum-value maximumthreshold maximum-value drop-probability drop-rate Parameters • color-name - Enter the color of drop precedence for the WRED profile. The available options are green, yellow, and red. • minimum-value - Enter the minimum threshold value for the specified color, from 1 to 12480. • maximum-value - Enter the maximum threshold value for the specified color, from 1 to 12480. • drop-rate - Enter the rate of drop precedence in percentage, from 0 to 100. Default Command Mode Usage Information Example Not configured WRED CONFIGURATION The no version of this command removes the WRED profile. OS10(config)# wred test_wred OS10(config-wred)# random-detect color green minimum-threshold 100 maximumthreshold 300 drop-probability 40 Supported Releases 10.4.0E(R1) or later Quality of service 1011