Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 614

track Assigns a unique identifier to track an object. Syntax Parameters track track-id [priority cost [value]] • track-id - Enter the object tracking resource ID number, from 1 to 500. • priority cost value - (Optional) Enter a cost value to subtract from the priority value, from 1 to 254. Default Command Mode Usage Information Example 10 INTERFACE-VRRP If you disable the interface, the cost value subtracts from the priority value and forces a new master election. This election process is applicable when the priority value is lower than the priority value in the backup virtual router. You can associate only one track object with a VRRP group. The no version of this command resets the value to the default. OS10(conf-eth1/1/5-vrid-254)# track 400 Example (Priority Cost) OS10(conf-eth1/1/5-vrid-254)# track 400 priority-cost 20 Supported Releases 10.2.0E or later track interface Monitors an interface and lowers the priority value of the VRRP group on that interface, if disabled. Syntax interface {ethernet node/slot/port[:subport]} [line-protocol] Parameters • ethernet node/slot/port[:subport] - (Optional) Enter the keyword and the interface information to track. • line-protocol - (Optional) Tracks the interface line-protocol operational status. Default Command Mode Usage Information Example Disabled EXEC Assign an object tracking unique ID number before tracking the interface. Use the line-protocol parameter to track for interface operational status information. The no version of this command resets the value to the default. OS10(config)# track 10 OS10(conf-track-10)# interface ethernet 1/1/5 line-protocol Supported Releases 10.2.0E or later virtual-address Configures up to 10 virtual router IP addresses in the VRRP group. Set at least one virtual IP address for the VRRP group to start sending VRRP packets. Syntax virtual-address ip-address1 [ip-address2...ip-address10] 614 Layer 3