Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 817

radius-server retransmit Configures the number of authentication attempts allowed on RADIUS servers. Syntax radius-server retransmit retries Parameters retries - Enter the number of retry attempts, from 0 to 100. Default An OS10 switch retransmits a RADIUS authentication request three times. Command Mode CONFIGURATION Usage Information Use this command to globally configure the number of retransmit attempts allowed for authentication requests on RADIUS servers. The no version of this command resets the value to the default. Example OS10(config)# radius-server retransmit 50 Supported Releases 10.2.0E or later radius-server timeout Configures the timeout used to resend RADIUS authentication requests. Syntax radius-server timeout seconds Parameters seconds - Enter the time in seconds for retransmission, from 0 to 1000. Default An OS10 switch stops sending RADIUS authentication requests after five seconds. Command Mode CONFIGURATION Usage Information Use this command to globally configure the timeout value used on RADIUS servers. The no version of this command resets the value to the default. Example OS10(config)# radius-server timeout 360 Supported Releases 10.2.0E or later radius-server vrf Configures the RADIUS server for the management or non-default VRF instance. Syntax Parameters radius-server vrf {management | vrf-name} • management - Enter the keyword to configure the RADIUS server for the management VRF instance. • vrf-name - Enter the keyword then the name of the VRF to configure the RADIUS server for that non- default VRF instance. Defaults Command Mode Usage Information Not configured CONFIGURATION Use this command to associate RADIUS servers with a VRF. If you do not configure a VRF on the RADIUS server list, the servers are on the default VRF. RADIUS server lists and VRFs have one-to-one mapping. Security 817