Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 105

• Assign users to groups and configure SNMPv3-specific authentication and encryption settings, and optionally, localized security keys and ACL-based access. Configuring SNMP consists of these tasks in any order: • Configure SNMP engine ID • Configure SNMP views • Configure SNMP groups • Configure SNMP users Configure SNMP engine ID The engine ID identifies the SNMP local agent on a switch. The engine ID is an octet colon-separated number; for example, 80:00:02:b8:04:61:62:63 . The local engine ID is used to create a localized authentication and/or privacy key for greater security in SNMPv3 messages. You generate a localized authentication and/or privacy key when you configure an SNMPv3 user. Configure a remote device and its engine ID to allow a remote user to query the local SNMP agent. The remote engine ID is included in the query and used to generate the authentication and privacy password keys to access the local agent. If you do not configure the remote engine ID, remote users' attempts to access the local agent fail. NOTE: Be sure to create a remote engine ID with the snmp-server engineID command before you configure a remote user with the snmp-server user command. If you change the configured engine ID for a remote device, you must reconfigure the authentication and privacy passwords for all remote users associated with the remote engine ID. snmp-server engineID [local engineID] [remote ip-address {[udp-port port-number] remoteengineID}] To display the localized authentication and privacy keys in an SNMPv3 user configuration, enter the show snmp engineID local command. Generate SNMPv3 localized keys OS10(config)# snmp-server engineID local 80:00:02:b8:04:61:62:63 OS10(config)# snmp-server engineID remote 1.1.1.2 udp-port 432 0xabeecc Display localized keys OS10# show snmp-server engineID local Local default SNMP engineID: 80:00:02:b8:04:61:62:63 Configure SNMP views Configure a read-only, read-write, or notify view of the MIB tree structure in the SNMP agent on the switch. The oid-tree value specifies the OID in the MIB tree hierarchy at which a view starts. Enter included or excluded to include or exclude the rest of the sub-tree MIB contents in the view. If necessary, re-enter the command to exclude tree entries in the included content. snmp-server view view-name oid-tree [included | excluded] Configure read-only view OS10(config)# snmp-server view readonly 1.3.6.1.2.1.31.1.1.1.6 included System management 105