Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1024

Supported Releases 10.3.0E or later show qos ingress buffer-statistics-tracking Displays ingress priority group-level peak buffer usage count in bytes for the given priority group on a given interface. Syntax show qos ingress buffer-statistics-tracking interface ethernet [node/slot/port] [priority-group {0-7}] [detail] Parameters • node/slot/port-Enter the port information. • [priority-group {0-7}]-Enter the priority-group keyword, followed by the group number. • detail-Displays per MMU instance-level statistics in platforms with multiple MMU instances. Default Command Mode Usage Information Example Not applicable EXEC When BST is enabled, if you make any configuration changes that affect the priority group or priority mapping configuration, such as removal of class map, addition of class map to policy map (nqos), and so on, be sure to clear the buffer statistics using the clear qos statistics type buffer-statistics-tracking command to view the actual peak buffer utilization for the current configuration. OS10# show qos ingress buffer-statistics-tracking interface ethernet 1/1/1 priority-group 0 Supported Releases 10.4.3.0 or later show qos ingress buffer-stats interface Displays the buffers statistics for the ingress interface. Syntax show qos ingress buffer-stats interface [interface node/slot/port[:subport]] Parameters • interface - (Optional) Enter the interface type. • node/slot/port[:subport] - (Optional) Enter the port information. Default Command Mode Usage Information Example Not configured EXEC None OS10# show qos ingress buffer-stats interface ethernet 1/1/1 Interface : ethernet1/1/1 Speed : 0 Priority Used Total Used HDRM Group buffers buffers 0 0 0 1 0 0 2 0 0 3 0 0 4 0 0 5 0 0 1024 Quality of service