Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 56

Reload system image Reboot the system manually using the reload command in EXEC mode. You are prompted to confirm the operation. OS10# reload System configuration has been modified. Save? [yes/no]:yes Saving system configuration Proceed to reboot the system? [confirm yes/no]:yes To configure the OS10 image loaded at the next system boot, enter the boot system command in EXEC mode. boot system {active | standby} • Enter active to load the primary OS10 image stored in the A partition. • Enter standby to load the secondary OS10 image stored in the B partition. Set next boot image OS10# boot system standby OS10# show boot Current system image information: Type Boot Type Active Standby Next-Boot Node-id 1 Flash Boot [A] 10.2.9999E [B] 10.2.9999E [B] standby Filter show commands You can filter show command output to view specific information, or start the command output at the first instance of a regular expression or phrase. display-xml except find grep no-more save Displays in XML format. Shows only text that does not match a pattern Searches for the first occurrence of a pattern and displays all the subsequent configurations Shows only text that matches a pattern Does not paginate output Saves the output to a file Display all output OS10# show running-configuration | no-more Alias command The alias command allows you to create shortcuts for commonly used or long commands. You can also execute long commands along with their parameters. The alias supports the following modes: • Persistent mode - The alias is persistent and is used in other sessions. The aliases created in Configuration mode are persistent. 56 Getting Started