Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 44

• managementethernet - Configures the Management port as the interface for the route, and associates the route with the Management interface. Configure management route OS10(config)# management route 10.10.20.0/24 10.1.1.1 OS10(config)# management route 172.16.0.0/16 managementethernet Configure user name and password To set up remote access to OS10, create a new user name and password after you configure the management port and default route. The user role is a mandatory entry. Enter the password in clear text. It is converted to SHA-512 format in the running configuration. A password must have at least nine alphanumeric and special characters, and at least five different characters from the password previously used for the same username. For backward compatibility with OS10 releases 10.3.1E and earlier, passwords entered in MD-5, SHA-256, and SHA-512 format are supported. To increase the required password strength, use the password-attributes command. • Create a user name and password in CONFIGURATION mode. username username password password role role - username username - Enter a text string. A maximum of 32 alphanumeric characters; 1 character minimum. - password password - Enter a text string. A maximum of 32 alphanumeric characters; 9 characters minimum. - role role - Enter a user role: ◦ sysadmin - Full access to all commands in the system, exclusive access to commands that manipulate the file system, and access to the system shell. A system administrator can create user IDs and user roles. ◦ secadmin - Full access to configuration commands that set security policy and system access, such as password strength, AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic keys, login statistics, and log information. ◦ netadmin - Full access to configuration commands that manage traffic flowing through the switch, such as routes, interfaces, and access control lists (ACLs). A network administrator cannot access configuration commands for security features or view security information. ◦ netoperator - Access to EXEC mode to view the current configuration. A network operator cannot modify any configuration setting on a switch. Create user name and enter password in clear text OS10(config)# username user05 password alpha404! role sysadmin CLI Basics The OS10 CLI is the software interface you use to access a device running the software - from the console or through a network connection. The CLI is an OS10-specific command shell that runs on top of a Linux-based OS kernel. By leveraging industry-standard tools and utilities, the CLI provides a powerful set of commands that you can use to monitor and configure devices running OS10. User accounts OS10 defines two categories of user accounts - use admin for both the username and password to log into the CLI, or use linuxadmin to log into the Linux shell. NOTE: You cannot delete the default admin and linuxadmin usernames. 44 Getting Started