Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 733

Example (IPv4) OS10(config-router-neighbor)# address-family ipv4 unicast OS10(conf-router-bgp-neighbor-af)# allowas-in 5 Example (IPv6) OS10(conf-router-template)# address-family ipv6 unicast OS10(conf-router-bgp-template-af)# allowas-in 5 Supported Releases 10.3.0E or later sender-side-loop-detection Enables the sender-side loop detection process for a BGP neighbor. Syntax sender-side-loop-detection Parameters None Default Enabled Command Mode ROUTER-BGP-NEIGHBOR-AF Usage Information This command helps detect routing loops, based on the AS path before it starts advertising routes. To configure a neighbor to accept routes use the neighbor allowas-in command. The no version of this command disables sender-side loop detection for that neighbor. Example (IPv4) OS10(conf-router-bgp-102)# neighbor 3.3.3.1 OS10(conf-router-neighbor)# address-family ipv4 unicast OS10(conf-router-bgp-neighbor-af)# sender-side-loop-detection Example (IPv6) OS10(conf-router-bgp-102)# neighbor 32::1 OS10(conf-router-neighbor)# address-family ipv6 unicast OS10(conf-router-bgp-neighbor-af)# no sender-side-loop-detection Supported Releases 10.3.0E or later show ip bgp l2vpn evpn Displays the internal BGP routes in the L2VPN EVPN address family in EVPN instances. Syntax show ip bgp l2vpn evpn [summary | neighbors] Parameters summary Display a summary of the BGP routes in the L2VPN address family that exchange with remote VTEPs. neighbors Display the remote VTEPs with whom BGP routes in the L2VPN address family exchange. Default Command mode Usage information Examples Not configured EXEC Use this command to display the BGP routes used for the L2VPN EVPN address family in EVPN instances on the switch. OS10# show ip bgp l2vpn evpn BGP local RIB : Routes to be Added , Replaced , Withdrawn BGP local router ID is 110.111.170.102 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed/network, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete VXLAN 733