Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 735

auto-evi Creates an EVPN instance automatically, including Route Distinguisher (RD) and Route Target (RT) values. Syntax Parameters Default Command mode Usage information auto-evi None Not configured EVPN In deployments running BGP with 2-byte or 4-byte autonomous systems, auto-EVI automatically creates EVPN instances when you create a virtual network on a VTEP in the overlay network. In auto-EVI mode, the RD and RT values automatically generate: • For a 2-byte autonomous system: - The RD auto-configures as Type 1 from the overlay network source IP address and the auto-generated EVI index. - The RT auto-configures as Type 0 from the 2-byte AS and the 3-byte VNI-Type encoded as 0x0002. • For a 4-byte autonomous system: - The RD auto-configures as Type 1 from the overlay network source IP address and the auto-generated EVI index. - The RT auto-configures as Type 2 from the 4-byte AS and the 2-byte EVI-Type encoded as 0x0202. Example OS10(config)# evpn OS10(config-evpn)# auto-evi Supported releases 10.4.2.0 or later evi Creates an EVPN instance (EVI) in EVPN mode. Syntax Parameters evi id id Enter the EVPN instance ID, from 1 to 65535. Default Command mode Usage information Example Not configured EVPN If an MP-BGP network uses 4-byte autonomous systems or to specify the RD and RT values, manually configure EVPN instances and associate each EVI with the overlay VXLAN virtual network. The EVI activates only when you configure the VXLAN network ID (VNI), RD, RT, and virtual network. OS10(config)# evpn OS10(config-evpn)# evi 10 OS10(config-evpn-evi)# Supported releases 10.4.2.0 or later VXLAN 735