Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 506

Example OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# ip address 10.1.1.0/24 Supported Releases 10.3.0E or later ip address dhcp Enables DHCP client operations on the interface. Syntax Parameters Defaults Command Mode Usage Information Example ip address dhcp None None INTERFACE The no version of this command disables DHCP operations on the interface. OS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)# ip address dhcp Supported Releases 10.3.0E or later ip arp Configures static ARP and maps the IP address of the neighbor to a MAC address. Syntax ip arp mac-address Parameters mac-address - Enter the MAC address of the IP neighbor in A.B.C.D format. Default Not configured Command Mode INTERFACE Usage Information Do not use Class D (multicast) or Class E (reserved) IP addresses. Zero MAC addresses (00:00:00:00:00:00) are invalid. The no version of this command disables the IP ARP configuration. Example OS10(conf-if-eth1/1/6)# ip arp 10.1.1.5 08:00:20:b7:bd:32 Supported Releases 10.2.0E or later ip arp gratuitous Enables an interface to receive or send gratuitous ARP requests and updates. Syntax Parameters ip arp gratuitous {update | request} • update - Specify to enable or disable ARP cache updates for gratuitous ARP. • request - Specify to enable or disable sending gratuitous ARP requests when duplicate address is detected. Default Command Mode Not configured CONFIG-INTERFACE 506 Layer 3