Epson CX5400 User Manual - Page 58
Aligning the Print Head - scanner error
UPC - 010343848412
View all Epson CX5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Caution: Don't touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing. If you need to replace other ink cartridges, repeat steps 4 through 6 before continuing with step 7. 7. Carefully lower the scanner and press it down until it clicks into place. The EPSON Stylus CX5400 begins charging the ink delivery system. The On light flashes and the EPSON Stylus CX5400 makes noise. Charging takes about 30 seconds. When it's finished, the On light stops flashing and stays on. Caution: Never turn off the EPSON Stylus CX5400 while the On light is flashing, unless the Stylus CX hasn't moved or made noise for more than 5 minutes. Aligning the Print Head If your printouts look grainy or vertical lines appear jagged, you may need to align the print head. Note: You can also use a printer software utility to align the print head right from your computer. Select the ? or Help button on your printer settings window for instructions running the print head alignment utility. 1. Make sure the EPSON Stylus CX5400 is turned on and not printing, and the Error light is off. 2. Load a stack of plain, letter-size paper in the sheet feeder. 55