HP P Class 450/500/550/600/650/700/750 HP Visualize x- and p-Class (733,800, 8 - Page 95

NOTE CAUTION Opening Your Personal Workstation and Installing Accessories Hard Disk Drives Hard Disk Drives This section describes how to install and remove your Personal Workstation's hard disk drives. There is also a section on how to complete your hard disk drive installation. Your Personal Workstation can have a maximum of three internal SCSI hard disk drives installed in the Personal Workstation. Two drives can be installed in the internal shelves of the hard disk drive bay area, and one of the hard disk drives can be install in an empty shelf of the CD drive bay area. You can only install a maximum of two IDE hard disk drive in the Personal Workstation, and both of these hard disk drives must be installed in the hard disk drive bay area. The IDE cable for the IDE hard disk drive must be connected to the primary IDE connector on the system board. Note that IDE and SCSI hard disk drives cannot be mixed. For the purpose of this discussion, the SCSI and IDE cables will be called the interface cables. The hard disk drive guide rails are color coded blue. They are located on the chassis of the CD drive bay area. Hard disk drives are susceptible to mechanical and electrical shock. When handling the drive, always wear the static-grounding strap that came with the hard disk drive kit. Always handle the drive carefully. Installing a Hard Disk Drive This procedure explains how to install your hard disk drive in your Personal Workstation. Since you can install a hard disk drive in the CD drive bay area, this section provides a procedure for doing this. Chapter 2 95