Icom VE-PG4 Operating Guide ver.1.36 - Page 110
Key-Touch Beep Level
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 23 24 25 23 Key-Touch Beep 24 Gain 25 Monitor Select whether or not the IP100H sounds the Key-Touch beep. (Default: Enable) When "Disable" is selected, the IP100H does not sound the confirmation beep when a key is pushed. ••Key-Touch Beep Level Set the volume level of the notification beeps when the IP100H's key is pushed. (Default: 10) The selectable range is between 0 and 32. LLWhen "0" is selected in this setting, the IP100H does not sound any beep, even if the volume level is set. LLWhen "Disable" is selected, this setting is grayed out and the volume level cannot be changed. Adjust the microphone sensitivity. (Default: 0 (dB)) •• Range: -12 (low) ~ 12 (high) dB, in 3 dB steps. LLWhen the noise level around the IP100H is high, set to low sensitivity and speak in a slightly louder voice that makes listening easier. Or when the noise level around the IP100H is quiet, set to high sensitivity and speak in smaller voice that makes listening easier. Select whether or not the IP100H with an earphone microphone uses the Monitor function. (Default: Disable) When this setting is set to "Enable," you can hear your transmit audio from the earphone. Set the monitor level to between 0 and 32. (Default: 10) LLWhen "0" is set, your voice is not heard from an earphone microphone, regardless of the audio setting in the IP100H. LLTo prevent howling, set this setting to "Disable" when using a speaker microphone, such as the HM-186LS. 6-39
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/110.png)