Icom VE-PG4 Operating Guide ver.1.36 - Page 160
System Code
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: NXDN-Trunking 1 2 3 4 5 6 7 8 9 10 11 12 13 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital Transceiver 1 (D-TRX1). LLThe above screen shows when the Encryption is set to "Enable." 7 System Code Displays the System Code that is set in the UC-FR5000. 8 Prefix ID Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000. (Default: 1) •• Range: 1 ~ 30 9 Unit ID Enter the Unit ID that are set in the UC-FR5000. •• Range: 1 ~ 2000 (Default: 1) 10 Prefix ID Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000. (Default: 1) •• Range: 1 ~ 30 11 Talkgroup ID Enter a Talkgroup ID. •• Range: 1 ~ 2000 (Default: 1) 12 Encryption Select whether or not to enable the Encryption function. (Default: Disable) When you enable the function, enter an encryption key between 1 and 32767. (Default: 1) 13 Connection Status ��� Click to connect or disconnect the transceiver, or to refresh the connection status. LLThe buttons are grayed out when Connected Repeater's Address is blank. LLThe settings cannot be changed while connection is established. Click before changing the settings on this screen. 7-6
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/160.png)