Icom VE-PG4 Operating Guide ver.1.36 - Page 233

8 Destination Settings Destination Settings screen Destination Settings > Destination Settings ■■Destination Settings (Talkgroup) The settings to call the registered Talkgroup through the IP network or the RoIP Gateway's transceiver port. LLThe displayed contents are changed according to the Call Type. 1 2 3 4 5 6 7 8 This is an example of setting "Talkgroup" as the Call Type (3), and "Appointment" as the Callee ID for IP100FS (8). 1 No Select the number to register the destination Talkgroup. Up to 1990 destinations can be registered. 2 Name Enter a destination name of up to 31 characters. 3 Call Type Select "Talkgroup" for Talkgroup calls. 4 Destination ID Enter a destination number. Range: 00001 ~ 60000 LLThis number must also be registered in the [ID List] setting (Transceiver Controller > Common Settings > ID List > ID List). LLWhen "FUNC Key" in the [Talkgroup Selection] setting (Transceiver Controller > Common Settings > Profile > Profile > Talkgroup Selection) is selected, the wireless LAN transceiver can call to members in the same Talkgroup. Select "OFF" on the wireless LAN transceiver to return to the usual standby mode screen. Talkgroup 01001 Talkgroup1001 Talkgroup is selected Talkgroup OFF Talkgroup is OFF 10/8 16ɿ57 Talkgroup1001 Talkgroup is selected 10/8 16ɿ57 All Talkgroup is OFF 8-13