Icom VE-PG4 Operating Guide ver.1.36 - Page 151

6 Transceiver Controller Profile screen Transceiver Controller > Common Settings > Profile ■■ Profile 20 21 22 23 24 25 26 27 23 History Display 24 Talkgroup Selection ��� 25 TalkBack Timer 26 TalkBack Timer (Telephone) 27 TalkBack Lock Set the call history display. (Default: Enable) ••Disable: Call histories are not displayed on the IP100H, even if you push the [ ] key. ••Enable: Call histories are displayed on the IP100H when you push the [ ] key. Set the key to select the Talkgroup. (Default: FUNC Key) ••FUNC Key: Select the Talkgroup by pushing the [FUNC] key. ••ID LIST Key: S elect the Talkgroup by pushing the [ ] key. Enter a time between 1 and 30 seconds that the IP100H will return to the standby mode after a received signal disappears.  (Default: 5 (seconds)) LLWhen "Disable" is selected, the IP100H returns to the standby mode (standby screen) as soon as the status indicator goes out. Enter a time between 0 and 600 seconds that the IP100H will return to the standby mode after a received signal from a telephone disappears.  (Default: 15 (seconds)) LLWhen "0" is selected, the TalkBack timer (Telephone) is disabled. In that case, the connection does not terminate until the telephone hangs up, or the IP100H terminates the call by pushing the [Option] key. Select whether or not the TalkBack Lock function is "Disable" or "Enable."  (Default: Enable) ••Enable: When another call is received in the TalkBack timer time after a call is finished and the IP100H returns to the standby mode, accepts to receive it if higher priority level call is received, or refuses if the same or lower priority level call is received than the finished call. After the TalkBack timer has passed, a new call can be received. ••Disable: A ccepts to receive a new call after your current call is finished. 6-80