Icom VE-PG4 Operating Guide ver.1.36 - Page 410

15 Management Management Tools screen Management > Management Tools ■■Telnet/SSH Set for accessing the RoIP Gateway using Telnet or SSH. 1 2 3 4 5 6 1 Telnet 2 Telnet Port 3 SSH 4 SSH Authentication Method 5 SSH Port 6 SSH Public Key Select whether or not to allow access to the RoIP Gateway using Telnet.  (Default: Disable) Enter the Telnet Port number. (Default: 23) •• Range: 23, or between 1024 and 65535. •• Some the RoIP Gateway's ports cannot access Telnet. LLEnter a different port number different than HTTP, HTTPS, or SSH. Select whether to allow to access by the SSH protocol.(Default: Enable) LLBy using SSH, you can encrypt the contents to be set using the SSH client program. LLThis product supports only the SSH protocol Version 2. LLPrepare an SSH client to use SSH. Select the SSH Authentication Method to access the RoIP Gateway when you set SSH Settings to "Enable." (Default: Automatic) •• Password: Authenticating with the password. •• Public Key: Authenticating with the Public Key. •• Automatic: Automatically authenticating with the password or the Public Key. Enter the Telnet Port number. (Default: 22) •• Range: 22, or between 1024 and 65535. •• Some of the RoIP Gateway's ports cannot access SSH. LLEnter a port number that is different from HTTP, Telnet, or HTTPS. Set the Public Key for accessing. LLDisplayed only when the SSH setting is set to "Enable" and SSH Authentication Method is set to "Public" or "Automatic." 15-7