Icom VE-PG4 Operating Guide ver.1.36 - Page 264
IP Line screen, SIP Server
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
10 IP Line Settings IP Line screen IP Line Settings > IP Line ■■SIP Server Setting used for connecting the RoIP gateway to the Session Initiation Protocol (SIP) server. 1 2 3 4 5 6 7 8 9 10 1 Index Assign the index number for each setting entry. •• Range: 1 ~ 100 LLClick if you wan to enter 2 or more SIP servers at once. Refer to the SIP Server Batch Setting. (p.10-4) 2 IP Phone Number Enter an IP phone number to use as a client of SIP server of up to 31 characters (0~9, #, *). LLThe number must be registered in the SIP server. LLOnly when Use Letters for Phone Number is set to "Allow," you can enter capital and small letters as a phone number. (P BX Advanced > Advanced Settings > SIP Settings > Use Letters for Phone Number) 3SIP Server Address Enter a server address or host name of up to 63 characters. 4 SIP Service Domain ��� Enter a service domain name of up to 63 characters. 5 User ID Enter an authentication user ID of up to 63 characters. Use the IP phone number that is entered in (2). 6 Password Enter an authentication password of up to 31 characters. LLThe entered password is masked like as "******". 7 Registration Expiration � Set the registration expiration time. The connection information stored in the SIP server is discarded after the set time has passed. (Default: 600) •• Range: 60 ~ 28800 seconds. 8 Registration Renewal Timer Set the registration renewal interval time to between 10 and 90%. (Default: Normal: 50, Exception: 50) The interval is expressed by the ratio of the value set in Registration Expiration (7) and the period of the normal and exception condition. 9
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/264.png)