Icom VE-PG4 Operating Guide ver.1.36 - Page 163
Digital Transceiver Connection
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: NXDN-Conventional Edit the settings of the digital transceiver to connect to the RoIP Gateway. You can connect a maximum of 4 digital transceivers to the network. 1 2 3 4 5 6 7 8 9 10 11 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital transceiver 1 (D-TRX1). LLThe above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "enabled," and Specify TX CC (10) is checked. 1 Connected Repeater's Address Enter the UC-FR5000's IP address. 2 TCP Port Number (Connection Port Enter the Connection Receive Port number that is set in the UC- FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 41200 Digital Transceiver 2 (D-TRX2): 41201 Digital Transceiver 3 (D-TRX3): 41202 Digital Transceiver 4 (D-TRX4): 41203) •• Range: 1024 ~ 65535 3 UDP Port Number (Data Port Enter the Data Receive Port number that is set in the UC-FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 41220 Digital Transceiver 2 (D-TRX2): 41221 Digital Transceiver 3 (D-TRX3): 41222 Digital Transceiver 4 (D-TRX4): 41223) •• Range: 1024 ~ 65535 4 Connection Key Code �� Enter the Key Code that is set in the UC-FR5000. (Default: ucfr5000) 5 Digital Frame Packet �� Select whether or not to enable the Packet Encryption function, according to the UC-FR5000 setting. (Default: Disable) When you enable the function, enter an 8 digit Common key. (Default: 00000000) 7-9