Icom VE-PG4 Operating Guide ver.1.36 - Page 70
Rule Settings for SelCall in Bridge Connection, SelCall in Bridge Connection screen
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5 Bridge Connection Settings SelCall in Bridge Connection screen Bridge Connection Settings > SelCall in Bridge Connection ■■Rule Settings for SelCall in Bridge Connection Sets the rules to make a individual call from a Digital transceiver that is connected to the RoIP Gateway, through a Bridge Connection. 1 2 3 4 5 6 7 8 1 Index The index assigned for entry. Setting range: 1 ~ 1000 2 Name Enter a name of up to 31 characters. 3 Call Type Select the type of call. •• Individual : Call only a specified radio. •• Group : Call all transceivers that belong to the specified group. •• All : Call all transceivers. 4 Prefix ID Enter the prefix ID of the SelCall destination. ID range: (Depending on the system mode) 5 Destination ID Enter the ID of the SelCall destination. ID range: (Depending on the system mode) Destination SelCall in Bridge Connection 6 Address Enter the RoIP Gateway's IP address which is connected to the transceiver that will communicate with the SelCall destination. 7 Port Number Enter the RoIP Gateway's port number which is connected to the transceiver that will communicate with the SelCall destination. 8
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/70.png)