Icom VE-PG4 Operating Guide ver.1.36 - Page 57

5 Bridge Connection Settings Bridge Connection screen Bridge Connection Settings > Bridge Connection ■■Bridge Connection Unicast mode 1 2 3 4 5 6 7 9 10 LLThe above example shows when the Bridge Connection Destination (2) is set to "Custom Bridge Connection." Multicast mode 1 2 3 8 9 10 LLThe above example shows when the Bridge Connection Destination (2) is set to "Digital Transceiver 2 (D-TRX2)." 3 Transmission Mode ��� 4 SelCall in Bridge Connection Set the transmission mode for Bridge Connection with the RoIP Gateway by either Unicast or Multicast. Set whether or not you can make an Individual call to a device that is connected to the same network as this RoIP Gateway.  (Default: Disable) LLIf this setting is enabled, The RoIP Gateway connects to the destination device according to the List of Rule Settings for SelCall in Bridge Connection. (Bridge Connection Setttings > SelCall in Bridge Connection > List of Rule Settings for SelCall in Bridge Connection) LLThis setting is displayed when the combination of Digital Transceiver (D-TRX1 ~ 4) and the Custom Bridge Connection are set. 5-3