Icom VE-PG4 Operating Guide ver.1.36 - Page 68
Voice Protocol, AMBE+2 Vocoder, Select an AMBE+2 Vocoder from Not Assigned, Internal, or CT-24.
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
5 Bridge Connection Settings Bridge Connection screen Bridge Connection Settings > Bridge Connection ■■AMBE+2 Vocoder Assignment 2 3 4 5 1 6 7 4 Voice Protocol (For Port Connection) �� 5 AMBE+2 Vocoder Assignment 6 Bridge Connection), this item is not displayed. Click to apply the entries. Click to reset the settings. LLYou cannot restore after clicking . 5-14
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/68.png)
5
BRIDGE CONNECTION SETTINGS
5-14
Bridge Connection screen
Bridge Connection Settings > Bridge Connection
■
AMBE+2 Vocoder Assignment
4
Voice Protocol
(For Port Connection) ��
Set the voice protocol for the port connection to “G.711u,” “Protocol
for Transceiver and SIP Phone Connection,” “Bridge Protocol,” or
“AMBE+2.”
(Default for RoIP Gateway 1 ~ 8: G.711u,
for Converter Bridge 1 ~ 20: G.711u)
L
“Protocol for Transceiver and SIP Phone Connection” can be selected only
with the Converter Bridge 1 ~ 20.
L
If you connect to the IP1000C,
set this item to “Protocol for Transceiver and
SIP Phone Connection.”
L
If you connect to the VE-PG4, set this item to “Bridge Protocol.”
5
AMBE+2 Vocoder
Assignment �������
Settable only when the Voice Protocol (
4
) is set to AMBE+2.
Select an AMBE+2 Vocoder from “Not Assigned,” “Internal,” or “CT-24.”
(Default for Digital Transceiver 1 ~ 4 (D-TRX1 ~ 4) : Internal)
•
Internal
: Assignable up to 4 ports.
•
CT-24
:
Assignable up to 2 ports. (The optional CT-24 is required.)
L
The AMBE+2 Vocoder for the Digital Transceiver 1 ~ 4 (D-TRX1 ~ 4) is fixed
to the internal vocoder.
L
When the settings of Bridge Connection Source and Bridge Connection
Destination are set as the digital transceiver in [Bridge Connection] setting
(Bridge Connection Settings > Bridge Connection > Bridge Connection), this
item is not displayed.
6
<Apply> ��������
Click to apply the entries.
7
<Reset> ��������
Click to reset the settings.
L
You cannot restore after clicking <Apply>.
6
7
4
5
1
2
3