Icom VE-PG4 Operating Guide ver.1.36 - Page 98

6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 10 11 12 13 14 15 16 17 18 LLThe screen shows when the Message (16) is set to "enable." 14 Priority Call Select whether or not the IP100H uses Priority Call.  (Default: Disable) The priority levels of the Call types are in the following order. Priority level High Priority Fixed Call type Telephone Emergency (High) Priority Call Remarks - For telephone communication Enable - Emergency (Normal) All Call (High) Individual Call (High) Selectable * Group Call (High) All Call (Normal) Disable Enable Enable Enable Disable - Includes the Area Call or using an IP100FS Includes using an IP100FS Includes the Area Call or using an IP100FS Includes the Area Call Individual Call (Normal) Disable - Low Group Call (Normal) Disable Includes the Area Call * Selectable in the Call Type Priority in the [RoIP Server] screen in the [RoIP Server settings] menu. LLPriority is given to the first call between calls with the same priority level. LLWhen a call is taken, priority is given to the setting of the caller. Example: Even while B and C are talking on a Group Call from A, B can make an Individual Call (High) to C. In this case, the Group Call is canceled. 6-27 Group Call A B VE-PG4 Wireless access point C Individual Call (High)