Icom VE-PG4 Operating Guide ver.1.36 - Page 56
Bridge Connection screen
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
5 Bridge Connection Settings Bridge Connection screen Bridge Connection Settings > Bridge Connection ■■Bridge Connection Sets the transceiver port bridge connection combination. LLThe transceiver port assigned as a bridge connection source or a destination is no longer usable as a call destination. LLThe EXT 1 and MIC ports are not usable at the same time. The EXT 1 port is disabled while a microphone is connected to the MIC port on the front panel. Unicast mode 1 2 3 4 5 6 7 9 10 LLThe above example shows when the Bridge Connection Destination (2) is set to "Custom Bridge Connection." Multicast mode 3 8 9 10 1 2 9 10 LLThe above example shows when the Bridge Connection Destination (2) is set to "Digital Transceiver 2 (D-TRX2)." 1 Bridge Connection Source Select the port for the bridge connection. 2 Bridge connection Destination Select the destination port for the bridge connection. LLOnly the ports that can be connected to the source port (1) are listed in this setting. NOTE: When you set a combination of a Digital Transceiver and an analog transceiver (EXT(I/O) Port,) enter [AMBE+2 Vocoder Assignment] settings below on the same screen. 5-2
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/56.png)