Icom VE-PG4 Operating Guide ver.1.36 - Page 116
Lone Worker Reminder Timer, while [Lone Worker On Timer] and [Lone Worker Reminder Timer] are
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 41 42 43 44 45 (This is an example of when the [Lone Worker] (42) is set to "Enable.") 44 Lone Worker Reminder Timer Lone Worker: Enable 45 PTT Delay Lone Worker: Enable Enter the period of time to start the Emergency call transmission after the period of time that is set in [Lone Worker ON Timer] (43) has passed. (Default: 60 (seconds)) When the transceiver is not operated after the period of time has passed, the Emergency call automatically starts. •• Range: 1 ~ 255 (seconds) in 1 second steps LLWhen the transceiver is operated by the [Emergency] function activation, [Lone Worker ON Timer] and [Lone Worker Reminder Timer] are reset. LLWhen the [Lone Worker Reminder Timer] is activated, beeps sound every 2 seconds until the timer is reset. Enter the period of time for the delay time to transmit by pushing [PTT] while [Lone Worker On Timer] and [Lone Worker Reminder Timer] are activated. (Default: Enable, 10) •• Range: 1 ~ 255 (×100 milliseconds) LLIf this item is set to a longer period of time, you can reset [Lone Worker On Timer] and [Lone Worker Reminder Timer] by momentary pushing [PTT] without transmitting. LLHold down [PTT] for more than the set period of time in this item to transmit. NOTE: The RoIP Gateway should not be used when high reliability is necessary. The communication cannot be made, depending on the environment around the RoIP Gateway, such as the consumption of a battery, the signal environment, or the access point or network status. Use the [Emergency] and [Lone Worker] functions as a supplementary function. 6-45
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/116.png)