Icom VE-PG4 Operating Guide ver.1.36 - Page 201
Manual, Client Mode: Disable, Default: Auto
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■EXT Output Settings Client Mode: Disable 6 7 8 9 10 11 12 13 14 15 16 17 LLThe screen shows Serial Communication (6) is set to "Enable," and Client Mode (7) is set to "Disable." LL12 ~17 are displayed only when the Data Mode (11) is set to "Manual." 8 Signal Level Select the serial communication line logic voltage level. (Default: ±5V(RS-232C) 9 Data Mode Select the communication method for serial communications between a device and the RoIP Gateway. (Default: Auto) •• Auto: Automatically starts serial communications from a Virtual Serial Port installed on your PC. •• Manual: Manually set serial communication method for a device. LLItems 12 ~ 17 are displayed when "Manual" is selected. 10 Baud Rate Select the serial communication baud rate between a device and the RoIP Gateway. (Default: 9600) 11 Data Bits Select the number of bits for serial communications. (Default: 8) 12 Parity Select the parity bit. (Default: none) 13 Stop Bits Select the stop bit length. (Default: 1) 14 Flow Control Select the Flow control option. (Default: None) 15 Session Timer Set the time to cut the TCP session when there is no communication from the host. (Default: 30) 7-47
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/201.png)