Icom VE-PG4 Operating Guide ver.1.36 - Page 112

6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 26 27 28 29 30 31 32 (This is an example of when the [VOX] (26) is set to "Enable.") 27 Attack Time VOX: Enable 28 Release Time VOX: Enable 29 Voice Delay VOX: Enable 30 VOX Threshold VOX: Enable 31 Sidetone VOX: Enable 32 Sidetone Volume VOX: Enable Adjust the Attack time (Default: 50) •• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps When audio from a headset microphone is input for this specified time, the IP100H starts transmitting. Adjust the Release time. (Default: 200) •• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps The release time is amount of time the transmitter stays ON after you stop speaking. Adjust the Voice Delay time to prevent clipping of the first few syllables after you begin speaking. (Default: 200) •• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps Adjust the VOX Threshold level. (Default: 40) •• Range: 0 ~ 100 (%) LLThe lower values make the VOX function more sensitive to your voice. Select whether or not to use the Sidetone function. (Default: Disable) When "Enable" is selected, you can hear your voice from the headset. Adjust the Sidetone level. •• Range: 0 (minimum) ~ 32 (maximum) (Default: 10) 6-41