Icom VE-PG4 Operating Guide ver.1.36 - Page 167
Enter a Talkgroup start ID., Default: Digital Transceiver D-TRX1: 201
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: dPMR Mode 2 1 2 3 4 5 6 7 8 9 10 11 12 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to Digital Transceiver 1 (D-TRX1). LLThe above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "Enable," and Specify TX CC (10) is checked. 5 Digital Frame Packet �� 6 Unit ID 7 Talkgroup ID (Start) ��� 8 Talkgroup ID 9 RX CC 10 Specify TX CC Select whether or not to enable the Packet Encryption function, according to the UC-FR5000 setting. (Default: Disable) When you enable the function, enter an 8 digit Common key. (Default: 00000000) Enter a unit ID Range: 1 ~ 9999999 (Default: Digital Transceiver (D-TRX1): 201 Digital Transceiver (D-TRX2): 202 Digital Transceiver (D-TRX3): 203 Digital Transceiver (D-TRX4): 204) Enter a Talkgroup start ID. •• Range: 1 ~ 9999999 (Default: 100000) Enter a Talkgroup ID. •• Range: 1 ~ 9999999 (Default: 100000) Enter a CC for receiving. •• Range: 0 ~ 63 (Default: 0) Check to separately enter the TX CC. (Default: Unchecked) When checked, enter a TX CC code between 0 and 63. (Default: 0) LLDo not duplicate the RX CC. 7-13
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/167.png)