Icom VE-PG4 Operating Guide ver.1.36 - Page 21

3 Network Settings DHCP Server screen Network Settings > DHCP Server ■■DHCP Server Configure the DHCP Server function. 1 2 3 4 5 6 7 1 DHCP Server 2 IP Pool Start Address �� 3 Pool Size 4 Subnet Mask 5 Lease Time 6 Domain Name 7 Default Gateway Select "Enable" to use the DHCP Server function. (Default: Disable) The DHCP Sever is activated, depending on the IP Pool Start Address (2) and Pool Size (3) items. Enter the IP Pool Start address. (Default: 192.168.0.10) An IP address is automatically assigned to a transceiver that the RoIP Gateway connects to, from this IP Pool Start address. Entry the number of an IP address that can be automatically assigned.  (Default: 30) Up to 128 addresses can be automatically assigned by the DHCP server function. Another 32 addresses can be manually assigned. Enter the subnet mask for the IP Pool Start address set in the "IP Pool Start Address" (2). (Default: 255.255.255.0) Enter the lease time period. Range: 1 ~ 9999 (hours) (Default: 72) Enter a network address domain name of up to 253 characters. Enter the default gateway IP address. When the DHCP Server function is used, this IP address is sent to a client. LLWhen this item is blank, the RoIP Gateway's IP address is sent. 3-4