Icom VE-PG4 Operating Guide ver.1.36 - Page 122
Other than the Master Controller, Accept Reboot Command
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 51 52 53 54 55 56 57 58 59 60 51 Provisioning Server ��� Enter an IP address or Host name of the Provisioning Server for the IP100H, of up to 63 characters. LLWhen the RoIP Gateway is used as its Provisioning Server, this entry is not necessary. 52 Accept Reboot Command from Other than the Master Controller Select whether or not the IP100Hs can be rebooted by the other than the specified Provisioning server (51). (Default: Disable) LLThe RoIP Gateway and IP1000C are compatible with this function. (As of Februrary, 2021) 53 SNTP Server 54 Automatic Firmware Updating at Power ON Enter the IP address of the device that is specified as the SNTP server for the IP100H. LLWhen the RoIP Gateway is used as its SNTP Server, this entry is not necessary. Select whether or not the IP100H will use the Automatic Update function. (Default: Enable (with Automatic Reboot)) •• Disable Disables the automatic firmware updating when the IP100H is turned ON. ••Enable (without Automatic Reboot) When this setting is set to "Enable (without Automatic Reboot)," the IP100H works as follows. 1. The IP100H confirms the latest firmware in the RoIP Gateway when it is turned ON. 2. The IP100H automatically downloads the firmware if it needs to be updated. 3. The IP100H will be updated when it is turned ON again. ••Enable (with Automatic Reboot) When this setting is set to "Enable (with Automatic Reboot)," the IP100H works as follows. 1. The IP100H confirms the latest firmware in the RoIP Gateway when it is turned ON. 2. The IP100H automatically downloads the firmware if it needs to be updated. 3. The IP100H is updated automatically, and then it is rebooted. LLYou can check the firmware version of the IP100H on the [TOP] menu. 6-51
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/122.png)