Icom VE-PG4 Operating Guide ver.1.36 - Page 164
Connection Port Settings > Digital Transceiver D-TRX, Enter an RX RAN code.
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: NXDN-Conventional 1 2 3 4 5 6 7 8 9 10 11 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital transceiver 1 (D-TRX1). LLThe above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "enabled," and Specify TX CC (10) is checked. 6 Unit ID 7 Talkgroup ID 8 RX RAN 9 Specify TX RAN 10 Encryption 11 Connection Status ��� Enter a unit ID. •• Range: 1 ~ 65519 (Default: 1) Enter a Talkgroup ID. •• Range: 1 ~ 65519 (Default: 1) Enter an RX RAN code. •• Range: 0 ~ 63 (Default: 1) Check to separately enter the TX RAN. (Default: Unchecked) When checked, enter a TX RAN code between 0 and 63. (Default: 1) Select whether or not to enable the Encryption function. (Default: Disable) When you enable the function, enter an Encryption key between 1 and 32767. (Default: 1) Click to connect or disconnect the transceiver, or to refresh the connection status. LLThe buttons are grayed out when Connected Repeater's Address is blank. LLThe settings cannot be changed while connection is established. Click before changing the settings on this screen. 7-10