Icom VE-PG4 Operating Guide ver.1.36 - Page 213
Displays the Voice Protocol Selected in the, Bridge Connection Settings > Bridge Connection >
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
7 Connection Port Settings RoIP Gateway screen Connection Port Settings > RoIP Gateway ■■RoIP Gateway Connection Mode: RoIP Gateway 1 21 3 4 5 6 7 LL6 is displayed only when the Transmission Mode (1) is set to "Multicast." 4 Source Port Number �� Enter a port number to receive an audio signal. LLUsed as a source port number for an audio signal. LLEnter a port number between 1024 and 65534, in even number. LLDo not conflict with the other port settings. LLIn the Multicast mode, all the default setting are "22510." (Default for RoIP Gateway1: 24400 Default for RoIP Gateway2: 24402 Default for RoIP Gateway3: 24404 Default for RoIP Gateway4: 24406 Default for RoIP Gateway5: 24408 Default for RoIP Gateway6: 24410 Default for RoIP Gateway7: 24412 Default for RoIP Gateway8: 24414) 5 Voice Protocol Displays the Voice Protocol Selected in the "Voice Protocol (For Custom Bridge Connection)" (Bridge Connection Settings > Bridge Connection > AMBE+2 Vocoder Assignment > Voice Protocol (For Custom Bridge Connection)) 6 Multicast TTL Enter the Time to Live value (TTL). TTL is used to control the Multicast packet delivery scope. Every time the packets pass through the router, this value subtracted. When the value is "0," the packets are discarded. (Default: 1) •• Range: 1 ~ 255 7 Connection Status ��� Click to connect or disconnect the RoIP Gateway, or to refresh the connection status. LLThe buttons are grayed out when Connected Repeater's Address is blank. LLThe settings cannot be changed while connection is established. Click before changing the settings on this screen. 7-59
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/213.png)