Icom VE-PG4 Operating Guide ver.1.36 - Page 159
Digital Transceiver Connection , System: NXDN-Trunking, Connected Repeater's Address
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: NXDN-Trunking Edit the settings of the Digital transceiver to connect to the RoIP Gateway. You can connect a maximum of 4 digital transceivers to the network. 1 2 3 4 5 6 7 8 9 10 11 12 13 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital Transceiver 1 (D-TRX1). LLThe above screen shows when the Encryption is set to "Enable." 1 Connected Repeater's Address Enter the UC-FR5000's IP address. 2 Connected Repeater's Port Number Enter the Connection Receive Port number that is set in the UC-FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 41220 Digital Transceiver 2 (D-TRX2): 41221 Digital Transceiver 3 (D-TRX3): 41222 Digital Transceiver 4 (D-TRX4): 41223) •• Range: 1 ~ 65535 3 Source Port Number �� Enter the Local Port number that is set in the UC-FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 43000 Digital Transceiver 2 (D-TRX2): 43001 Digital Transceiver 3 (D-TRX3): 43002 Digital Transceiver 4 (D-TRX4): 43003) •• Range: 1 ~ 65535 4 Connection Key Code �� Enter the Key Code that is set in the UC-FR5000. (Default: ucfr5000) 5 Area Bit Turn the Area Bit function ON or OFF, according to the UC-FR5000 setting. (Default: OFF) 6 Integrator Code Displays the Integrator Code that is set in the UC-FR5000. 7-5