Icom VE-PG4 Operating Guide ver.1.36 - Page 179
Connection Port Settings > EXT I/O EXT, Default: EXT1=50000, EXT2=50001
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■ Transceiver Connection Transceiver Model: General Setting These items are displayed when "Transceiver" is selected as a connected unit. (Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit) (Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port) 14 TCP Port Number 15 Communication Control � 16 Signal Level 17 Data Mode 18 Transceiver Control ��� 19 Transceiver Mode 20 Call Type 21 Destination Prefix ID �� 22 Destination ID 23 Source Prefix ID 24 Source ID Enter a port number between 1024 and 65535. (Default: EXT1=50000, EXT2=50001, EXT3=50002, EXT4=50003) Select the communication type, Full-Duplex or Half Duplex. (Default: Full-Duplex) Select the serial communication line logic voltage level. (Default: ±5V(RS-232C)) •• Options: ±5V(RS-232C), 0V/3V (Logic), or 0V/5V (Logic) Select the communication method for serial communication between a device and the RoIP Gateway. (Default: Auto) •• Auto: Automatically starts serial communication from a Virtual Serial Port installed on your PC. •• Manual: Manually set serial communication method for a device. *Items 27 ~ 31, and 33 are displayed when "Manual" is selected. Select "Enable" to control the transceiver using serial communication. (Default: Disable) *Items 19 ~ 24 are displayed when "Enable" is selected. Select an operating mode. (Default: NXDN Conventional) •• Options: NXDN Conventional, NXDN Trunking, dPMR, or SAT. Select a call type. •• Options: Individual, Group, or All (Default: Group) Enter a destination prefix ID. The ID may differ, depending on the system. (Default: Blank) •• Range: 0 ~ 30 Enter the default ID for the EXT port between 00001 and 9999999. (Default: 1) LLEnter an ID between 00001 and 99999 when the Destination Prefix ID (21) is entered. Enter a stationʼs source prefix ID. The ID may differ, depending on the system. (Default: Blank) •• Range: 0 ~ 30 Enter a stationʼs source ID between 00001 and 9999999. The ID is sent to the destination. (Default: 1) LLEnter an ID between 00001 and 99999 when the Source Prefix ID (23) is entered. 7-25