Icom VE-PG4 Operating Guide ver.1.36 - Page 359
Connection, For Unicast, The Default port settings in the Unicast mode
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
13 PBX Extension Converter Bridge screen PBX Extension > Converter Bridge ■■Connection Sets the destination device of the bridge connection that connects to the SIP phones 1 2 3 4 5 6 7 LLThe screen above is when the Transmission Mode (1) is set to "Multicast". 1 Transmission Mode ��� 2 Destination Address ��� 3 Destination Port Number � Set the transmission mode on each extension (port) number. (Default: Unicast) Set an appropriate IP address, depending on the Transmission Mode (1) setting. ••For Unicast: Set the IP address for the LAN, or the domain name of the destination, that of up to 63 characters. (Default: Blank) ••For Multicast: Set the same value as the bridge setting of the call destination. (Default: 239.255.255.1) Set the same port number as the "Source Port Number" (4) setting of the VE-PG4 that works as the Converter Bridge connection Destination. •• Range: An even number from 2 to 65534. LLDo not duplicate other connection port settings. The Default port settings in the Unicast mode PORT DEFAULT PORT Converter Bridge 1 24200 Converter Bridge 11 Converter Bridge 2 24202 Converter Bridge 12 Converter Bridge 3 24204 Converter Bridge 13 Converter Bridge 4 24206 Converter Bridge 14 Converter Bridge 5 24208 Converter Bridge 15 Converter Bridge 6 24210 Converter Bridge 16 Converter Bridge 7 24212 Converter Bridge 17 Converter Bridge 8 24214 Converter Bridge 18 Converter Bridge 9 24216 Converter Bridge 19 Converter Bridge 10 24218 Converter Bridge 20 DEFAULT 24220 24222 24224 24226 24228 24230 24232 24234 24236 24238 13-61
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/359.png)