Icom VE-PG4 Operating Guide ver.1.36 - Page 181
Bridge Communication, Default: EXT1=301, EXT2=302
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■Bridge Communication These items are displayed when "Transceiver" is selected as a connected unit. (Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit) (Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port) Edit the Bridge Communication settings for transceivers connected to the EXT1 ~ EXT4 ports. These items are Displayed only when "Connection Unit" is set to "Transceiver." 1 2 3 4 5 6 LLThe above screen shows when Encryption (1) is set to "Enable." LL2~5 are not displayed when the Transceiver Model is set to "IC-SAT100." 1 Encryption Select whether or not to enable the Encryption function. (Default: Disable) When you enable the function, enter an encryption key between 1 and 32767. (Default: 1) 2 TalkBack Select whether or not to enable the TalkBack function. (Default: Enable) When the function is enabled, Select the TalkBack time. (Default: 5) •• Range: 1 ~ 10 (seconds) 3 Call Type Select a call type. •• Options: Individual, Group, or All (Default: Group) 4 Destination Prefix ID �� Enter a destination prefix ID. The ID may differ, depending on the system. (Default: Blank) •• Range: 0 ~ 30 5 Destination ID Enter the default ID for the EXT port between 00001 and 9999999. (Default: 1) LLEnter an ID between 00001 and 99999 when the Destination Prefix ID (4) is entered. 6 Source ID Enter a stationʼs source ID between 1 and 9999999. The ID is sent to the destinations. (Default: EXT1=301, EXT2=302, EXT3=303, EXT4=304) 7-27
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/181.png)