Icom VE-PG4 Operating Guide ver.1.36 - Page 414

15 Management Date and Time screen Management > Date and Time ■■NTP The Automatic Clock Synchronize function automatically synchronizes the internal clock with the time server (NTP). LLTo use this function, an Internet connection and default gateway settings are necessary. 1 2 3 4 1 NTP Client 2 NTP Server 1 3 NTP Server 2 4 Status Select whether or not to use the Automatic Clock Synchronize function.  (Default: Disable) •• Disable: Not used. •• NTP: Set to the internal clock automatically by accessing the NTP. •• LTE: Set to the internal clock automatically by accessing the LTE Module. Enter the time management server's IP address.  (Default: 210.173.160.27) If the RoIP Gateway cannot access this address, the address set in the [NTP Server 2] (3) item is used. Enter the second time management server's IP address. (Default: 210.173.160.57) Displays the status whether or not to synchronize with the NTP Server or the transceiver module. CAUTION: When you select NTP Client as NTP, you must set the Interface for the NTP server. (Network Settings > IP Address > IP Address > Default Gateway) (Network Settings > Static Routing > Static Routing) TIP: The Automatic Clock Synchronize function When you connect to the SIM card, ••Set the Automatic Clock Synchronize function to LTE, to synchronize the current time to the transceiver module. ••Set the Automatic Clock Synchronize function to NTP, to synchronize the current time to the NTP server. ••After inserting the SIM card, the RoIP Gateway is automatically set to the Automatic Clock Synchronize function. 15-11