Icom VE-PG4 Operating Guide ver.1.36 - Page 86

6 Transceiver Controller Transceiver Management screen Transceiver Controller > Transceiver Settings > Transceiver Management ■■Transceiver Management The RoIP Gateway can monitor the registered IP100Hs and IP100FSs. And if necessary, the RoIP Gateway can reboot the registered all IP100Hs. 7 1 2 3 4 5 6 8 9 10 LLAn IP100H is displayed in bold when a setting is changed and a reboot is required. 1 Check Box 2 Registration Status ��� 3 IP Address 4 Current Status Click a Check Box to add a check mark to the IP100H that you want to reboot. LLYou cannot select an IP100FS, or an IP100H that has "Disconnected" displayed in [Registration Status]. LLBy clicking the [All] box, you can select or cancel all IP100Hs in the list. Displays the IP100Hs' or IP100FSs' Registration Status as either "Connected" or "Disconnected." LLDisplays "Disconnected" if the IP100H is turned OFF or the IP100FS's application is not running. LLWhen the RoIP Gateway sends the reboot command to an IP100H from the [Transceiver Management] menu, the following status are displayed: "Receiving reboot command," "Reboot command reception success," "Reboot command reception failed," "Ready to reboot" "Rebooting," "Updating," "Update failed," "Downloading," "Status notification failed," and "Low battery." Displays the IP Addresses of the IP100Hs or IP100FSs. LLWhen [Registration Status] displays "Disconnected," "-" is displayed. Displays the Current Status of the IP100Hs. (Example: In a meeting) LL Informatio ••If the Status function is set to OFF, "-" is displayed. ••If you click the (7) button, the latest status will be displayed. ••When the IP100H is remotely locked by the IP100FS, and it cannot communicate with others or cannot transmit, "Transmit and receive disabled" or "Transmit disabled" is displayed. ••If the IP100H is sending an emergency call, "Emergency" is displayed. 6-15