Icom VE-PG4 Operating Guide ver.1.36 - Page 426
Online Update, Firmware Update screen
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
15 Management Firmware Update screen Management > Firmware Update ■■Online Update Downloads the firmware through the Internet, and automatically updates it. NOTE: To use this function, an Internet connection, or LTE(4G/3G) is required. Check for Updates Click to access the update management server. When the RoIP Gateway has successfully accessed the server, the latest firmware version is displayed, as shown below. About the firmware information: •• When there is a new firmware update available, the button is displayed. •• When there is no firmware update, "Firmware already up-to-date" is displayed. •• When an error message is displayed, check the network connection so that you can access the update management server, as follows: When a SIM card is installed: •• Confirm that the antennas are attached properly to the [ANT1] and [ANT2] connectors. When a SIM card is not installed: •• Confirm that the default gateway and DNS server address are properly set to the RoIP Gateway. (Network Settings > IP Address) •• Ask your network administrator if a web transmission from the RoIP Gateway is blocked. CAUTION: Do not turn OFF the power until the firmware update is completed. LLAsk your dealer for updated function or specification details. 15-23