Icom VE-PG4 Operating Guide ver.1.36 - Page 195

7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■EXT Input Settings 6 7 8 9 10 11 12 13 14 15 16 17 12 Control Signal Type ��� Select the control signal input type. (Default: Momentary) •• Momentary: While the control signal is input from the B3/B4 terminal (General control I/O), activates the port. •• One-shot: When the control signal is input from the B3/B4 terminal (General control I/O), continuously activates the port. And deactivates with no input. The input signal has been detected for the period of time, that is set in the ON Timer (13). The RoIP Gateway recognizes the signal input and retains the type for the period of time, that is set in the OFF Timer (14). 13 ON Timer Select the delay time until the input is detected. •• Range: 0.1 ~ 3 (seconds) (Default: 1) 14 OFF Timer Select the delay time until the port (B3/B4 terminal (General control input)) is deactivated. (Default: 1) •• Range: 0.1 ~ 3 (seconds) A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 Refer to the INSTALLATION GUIDE Section 6 for the port details. 7-41