Icom VE-PG4 Operating Guide ver.1.36 - Page 32
Settings setting Router Settings > WAN > Connection Settings
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4 Router Settings WAN screen Router Settings > WAN ■■Connection Status (When "Connection Type" is set to "PPPoE") The WAN connection status is displayed. LLUp to 2 PPPoE sessions can be connected from the registered PPPoE destination. LLThe first session is set to the default gateway. LLTo use a second session, set the Static Routing and the Policy Routing. 1 2 3 4 5 6 7 8 1 PPPoE Session 2 Destination 3 Connection Status 4 Connection Type 5 IP Address 6 Peer IP Address 7 DNS Server 8 Uptime The first session and the second session are displayed respectively. Select the destination from the WAN connection set in the [Connection Settings" setting (Router Settings > WAN > Connection Settings). LLYou cannot select while connecting the line. / Click to manually connect or disconnect the selected WAN. LL is displayed when the line is connected. LLIf "Connecting" is not displayed in [Connection Status] when the line is connected, check the cable connection and network configuration. The connection status to the Internet line is displayed as "Unplugged," "Disconnect," "Connecting," or "Connected." The WAN connection type is displayed. The RoIP Gateway's IP address is displayed. The default Gateway IP address specified by your service provider is displayed. The DNS server's IP address is displayed. The elapsed time the RoIP Gateway has been connected to the network is displayed. 4-5
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/32.png)